Câmaras IP 360° TruVision
Câmaras IP panorâmicas 360° TruVision, 6MPx e 12MPx, interior/exterior com IR integrado
NOVO
SmartCell Variantes Duplo Detetor de Fumo/Calor
SmartCell duplo detetor de fumo/calor
CDC4
Controlador Inteligente de 4-8 Portas com PSU 12V
TruVision Navigator 9.0
Software de Gestão de Vídeo TruVision
Encoders H.265 IP TruVision
Os Encoders de Vídeo IP com 1, 2, 4 & 8 canais, com compressão H.264 & H.265. Suporta câmaras analógicas e HD-TVI TruVision até 5 Mpx
Painel de Controlo SmartCell Wireless (Sem módulo Comunic.) Variantes (230 VAC)
Painel de Controlo SmartCell wireless, variantes 230 VAC sem módulo de comunicações. Disponível em vários idiomas, destinado a instalações de incêndio de pequena e média dimensão
Por favor indique no mínimo 2 carateres para procura.
DMN700Y
Botoneira Comando Amarela - Contacto Seco
- Enhanced aesthetics
- Easy to install (plug and play)
- Surface mount options
- Protection hinged cover with Anti-Tamper facility
- Backward compatibale
DMN700Y
Botoneira Comando Amarela - Contacto Seco
- Enhanced aesthetics
- Easy to install (plug and play)
- Surface mount options
- Protection hinged cover with Anti-Tamper facility
- Backward compatibale
Relance
General
The DMN700R100-KITR is a red manual call point for surface mount applications. It has an internal 100 ohm series resistor and free contact. It is supplied complete with a resetable element, test key and surface mount box.
Installation
Installation time and ultimately cost, are of paramount importance. The MCP range directly reflects this need by providing a unique ‘plug and play’ concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple, but effective, with no re-termination required and no time wasted.
Options and approvals
Through new standards and legislation, both break glass and re-settable operating elements may now be used. To provide the greatest ‘flex-ability’, the new MCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products are required.
Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard
Detalhes
- Enhanced aesthetics
- Easy to install (plug and play)
- Surface mount options
- Protection hinged cover with Anti-Tamper facility
- Backward compatibale
- Key test facility
- May be used with glass or resettable element
- Easy to replace glass
- High quality micro switch
- Fully approved to the latest standards
Especificações Técnicas
datasheet| Isolamento | |
|---|---|
| Resistência da série | NA |
| Físico | |
|---|---|
| Peso líquido | 110 g |
| Cor | Amarelo |
| Material | PC/ABS |
| Ambiental | |
|---|---|
| Temperatura de operação | -10 to +55°C |
| Temperatura de armazenamento | -10 to +55°C |
| Humidade relativa | 0 to 95% noncondensing |
| Ambiente | Interior |
| Classificação IP | IP24D |
| Cable Termination | |
|---|---|
| 0.5 - 2.5 mm² | |
| Max. contact rating (resistive load) | |
|---|---|
| 2A @ 30 VDC | |
Downloads
todos os idiomasIf available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.
