Câmaras IP 360° TruVision
Câmaras IP panorâmicas 360° TruVision, 6MPx e 12MPx, interior/exterior com IR integrado
NOVO
SmartCell Variantes Duplo Detetor de Fumo/Calor
SmartCell duplo detetor de fumo/calor
CDC4
Controlador Inteligente de 4-8 Portas com PSU 12V
TruVision Navigator 9.0
Software de Gestão de Vídeo TruVision
Encoders H.265 IP TruVision
Os Encoders de Vídeo IP com 1, 2, 4 & 8 canais, com compressão H.264 & H.265. Suporta câmaras analógicas e HD-TVI TruVision até 5 Mpx
Painel de Controlo SmartCell Wireless (Sem módulo Comunic.) Variantes (230 VAC)
Painel de Controlo SmartCell wireless, variantes 230 VAC sem módulo de comunicações. Disponível em vários idiomas, destinado a instalações de incêndio de pequena e média dimensão
Por favor indique no mínimo 2 carateres para procura.
PR2000C
Impressora Interna - Série 2000
- Easy installation and configuration
- Power supplied from the fire panel
- May be used for Event or Report printing
- May be used as a Panel or System printer
- Full printer supervision from the fire panel
PR2000C
Impressora Interna - Série 2000
- Easy installation and configuration
- Power supplied from the fire panel
- May be used for Event or Report printing
- May be used as a Panel or System printer
- Full printer supervision from the fire panel
Relance
General
The PR2000C is a 40-column thermal printer with power supply. It is intended for use with all 2000C series fire panels and repeaters. The PR2000C is supplied with all necessary accessories and brackets to allow for easy installation inside the fire panel housing. The required 24 VDC and serial connection connect the printer to the fire panel hardware.
Print Configuration
Because of the powerful printer configurations, the PR2000C may be used for event or report printing, with print filters allowing only the required data to be printed. In addition the configuration of the printer allows for only local panel events to be printed, or system events via the fire panel network, allowing for only a single printer allocated to multiple fire panels.
Printer Supervision
When connected to a 2000C series fire panel or repeater, the power to the printer may be supplied from the fire panel power supply. Any problems with the printer, such as a disconnection or paper-out conditions, will be displayed on the fire panel.
Printer Paper
In addition to fast and good quality printing, the PR2000C will allow printouts to be stored for more than 5 years without loss of readability.
Codepage Support
International codepage support allows for printouts in all languages supported by the fire panel using the correct print character sets for special languages.
Detalhes
- Easy installation and configuration
- Power supplied from the fire panel
- May be used for Event or Report printing
- May be used as a Panel or System printer
- Full printer supervision from the fire panel
- Fast printing speed
- Good print quality
- Extended printout storage life
- International codepage support
Especificações Técnicas
datasheet| Físico | |
|---|---|
| Fator de forma | Grande |
| Normas & regulamento | |
|---|---|
| Certificação | EN54-2 |
| Electrical | |
|---|---|
| Operating voltage | 18-36 VDC |
| Current consumption: • Printer in standby • Printer printing | 55 mA @ 24 VDC 930 mA @ 24 VDC |
| Environmental | |
|---|---|
| IP rating | IP54 |
| Operating temperature | 0°C to +50°C |
| Storage temperature | -10°C to +70°C |
| Relative humidity (noncondensing) | 10% to 80% |
| Physcial | |
|---|---|
| Dimensions (W x H x D) | 87 x 61 x 42 mm |
| Weight | 90 g |
| Data | |
|---|---|
| Baud Rate | 9600 |
| Bit pattern | 8, 1, n |
| Medium | RS232 |
| Paper | |
|---|---|
| Number of columns | 40 |
| Print method | Thermal |
| Resolution | 203 DPI (8 dots/mm) |
| Paper specification | Thermal roll, maximum external diameter 30 mm. Heat sensitive surface on the outside of the roll. |
| Paper weight | 55 to 70 g |
| Paper width | 57.5 mm |
Downloads
todos os idiomasClique em "todos os idiomas" para ver possibilidades de download.
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.
